Grandstream Networks UCM6510 User Manual page 252

Audio Mix Record
DND/Call Forward
Do Not Disturb (DND) A ctivate
Do Not Disturb (DND) Deactivate
Call Forward Busy A ctivate
Call Forward Busy Deactivate
Call Forward No A nswer A ctivate
Call Forward No A nswer
Deactivate
Call Forward Unconditional
Activate
Call Forward Unconditional
Deactivate
Feature Misc
•
Feature Code Digits Timeout
Call Park
Firmware Version 1.0.2.5
Options
•
Disable
Allow Caller: Enable the feature code on caller side only.
Allow Callee: Enable the feature code on callee side only.
Allow Both: Enable the feature code on both caller and callee.
Default code: *3.
•
Enter the code followed by # or SEND to start recording the
•
audio call and the UCM6510 will mix the streams natively on the
fly as the call is in progress.
Options
•
Disable
Allow Caller: Enable the feature code on caller side only.
Allow Callee: Enable the feature code on callee side only.
Allow Both: Enable the feature code on both caller and callee.
Default code: *77.
•
Default code: *78.
•
Default Code: *90.
•
Enter the code and follow the voice prompt. Or enter the code
•
followed by the extension to forward the call.
Default Code: *91.
•
Default Code: *92.
•
Enter the code and follow the voice prompt. Or enter the code
•
followed by the extension to forward the call.
Default Code: *93.
•
Default Code: *72.
•
Enter the code and follow the voice prompt. Or enter the code
•
followed by the extension to forward the call.
Default Code: *73.
•
Default Setting: 1000.
•
Configure the maximum interval (in milliseconds) between the
•
digits input to activate the feature code.
Default Extension: 700.
•
During an active call, initiate blind transfer and then enter this
•
code to park the call.
UCM6510 IP PBX User Manual Page 251 of 317