SAMPLE
C ONFIGURATION
F OR
F AX-‐‑ T O-‐‑ E MAIL
The following instructions describe a sample configuration on how to use Fax-to-Email feature on the
UCM6510.
1. Connect PSTN line to the UCM6510 FXO port.
2. Go to UCM6510 web GUI->Internal Options->Fax/T.38 page. Create a new Fax extension.
3. Go to UCM6510 web GUI->Basic/Call Routes->Analog Trunks page. Create a new analog trunk
with "FAX Detection" set to "No".
4. Go to UCM6510 web GUI->Basic/Call Routes->Inbound Routes page. Create a new inbound route
and set the default destination to the Fax extension.
5. Once successfully configured, the incoming Fax from external Fax machine to the PSTN line number
will be converted to PDF file and sent to the Email address Faxtest@ucm6510mycompany.com as
attachment.
Firmware Version 1.0.2.5
Figure 127: Create Fax Extension
Figure 128: Inbound Route to Fax Extension
UCM6510 IP PBX User Manual
Page 227 of 317