Figure 116: Page/Intercom Group Settings - Grandstream Networks UCM6510 User Manual
Ip pbx
Hide thumbs
Also See for UCM6510:
- User manual (483 pages) ,
- Basic configuration manual (30 pages) ,
- Quick installation manual (21 pages)
Table of Contents
Advertisement
Click on
to edit the paging/intercom group.
•
Click on
to delete the paging/intercom group.
•
Click on "Paging/Intercom Group Settings" to edit A lert-Info Header. This header will be included in the
•
SIP INVITE message sent to the callee in paging/intercom call.
The UCM6510 has pre-configured paging/intercom feature code. By default, the Paging Prefix is *81
•
and the Intercom Prefix is *80. To edit page/intercom feature code, click on "Feature Codes" in the
"Paging/Intercom Group Settings" dialog. Or users could go to web GUI->PBX->Internal
Options->Feature Codes directly.
Firmware Version 1.0.2.5
Figure 116: Page/Intercom Group Settings
UCM6510 IP PBX User Manual
Page 213 of 317
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the UCM6510 and is the answer not in the manual?