Syslog - Grandstream Networks UCM6510 User Manual
Ip pbx
Hide thumbs
Also See for UCM6510:
- User manual (483 pages) ,
- Basic configuration manual (30 pages) ,
- Quick installation manual (21 pages)
Table of Contents
Advertisement
All: A ll the configurations and data will be reset to factory default.
•
SYSLOG
On the UCM6510, users could dump the syslog information to a remote server under web
GUI->Maintenance->Syslog. Enter the syslog server hostname or IP address and select the module/level
for the syslog information.
The default syslog level for all modules is "error", which is recommended in your UCM6510 settings
because it can be helpful to locate the issues when errors happen.
Some typical modules for UCM6510 functions are as follows and users can turn on "notic" and "verb"
levels besides "error" level.
pbx: This module is related to general PBX functions.
chan_sip: This module is related to SIP calls.
chan_dahdi: This module is related to analog calls (FXO/FXS).
app_meetme: This module is related to Conference Bridge.
--------------------------------------------------------------------------------------------------------------------------------------------
Note:
Syslog is usually for debugging and troubleshooting purpose. Turning on all levels for all syslog modules is
not recommended for daily usage. Too many syslog print might cause traffic and affect system
performance.
--------------------------------------------------------------------------------------------------------------------------------------------
Firmware Version 1.0.2.5
Figure 185: Reset and Reboot
UCM6510 IP PBX User Manual
Page 310 of 317
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the UCM6510 and is the answer not in the manual?
Questions and answers