Call Forward No A nswer
CFN Time Condition
Call Forward Busy
CFB Time Condition
Ring Simultaneously
Ring Simultaneously
External Number
Firmware Version 1.0.2.5
"Specific" has higher priority to "Office Times" if there is a conflict in
•
terms of time period.
Specific time can be configured on the bottom of the extension
•
configuration dialog. Scroll down the add Time Condition for specific
time.
Office Time and Holiday could be configured on page Settings->Time
•
Settings->Office Time/Holiday page.
Configure the Call Forward No Answer target number. If not configured,
the Call Forward No Answer feature is deactivated. The default setting is
deactivated.
Select time condition for Call Forward No Answer. The available time
condition are "Office Time", "Out of Office Time", "Holiday", "Out of
Holiday", "Out of Office Time or Holiday" and "Specific".
Note:
"Specific" has higher priority to "Office Times" if there is a conflict in
•
terms of time period.
Specific time can be configured on the bottom of the extension
•
configuration dialog. Scroll down the add Time Condition for specific
time.
Office Time and Holiday could be configured on page Settings->Time
•
Settings->Office Time/Holiday page.
Configure the Call Forward Busy target number. If not configured, the Call
Forward Busy feature is deactivated. The default setting is deactivated.
Select time condition for Call Forward Busy. The available time condition
are "Office Time", "Out of Office Time", "Holiday", "Out of Holiday", "Out of
Office Time or Holiday" and "Specific".
Note:
"Specific" has higher priority to "Office Times" if there is a conflict in
•
terms of time period.
Specific time can be configured on the bottom of the extension
•
configuration dialog. Scroll down the add Time Condition for specific
time.
Office Time and Holiday could be configured on page Settings->Time
•
Settings->Office Time/Holiday page.
Enable this option to have an external number ring simultaneously along
with the extension. If a register trunk is used for outbound, the register
number will be used to be displayed for the external number as caller ID
number.
Set the external number to be rang simultaneously. '-' is the connection
UCM6510 IP PBX User Manual
Page 121 of 317