Grandstream Networks UCM6510 User Manual page 127

Call Forward Busy
CFB Time Condition
CC Settings
Enable CC
Ring Simultaneously
Ring Simultaneously
External Number
Time Condition for Ring
Simultaneously
Other Settings
Ring Timeout
Firmware Version 1.0.2.5
Note:
"Specific" has higher priority to "Office Times" if there is a conflict in
•
terms of time period.
Specific time can be configured on the bottom of the extension
•
configuration dialog. Scroll down the add Time Condition for specific
time.
Office Time and Holiday could be configured on page Settings-­>Time
•
Settings-­>Office Time/Holiday page.
Configure the Call Forward Busy target number. If not configured, the Call
Forward Busy feature is deactivated. The default setting is deactivated.
Select time condition for Call Forward Busy. The available time condition
are "Office Time", "Out of Office Time", "Holiday", "Out of Holiday", "Out of
Office Time or Holiday" and "Specific".
Note:
"Specific" has higher priority to "Office Times" if there is a conflict in
•
terms of time period.
Specific time can be configured on the bottom of the extension
•
configuration dialog. Scroll down the add Time Condition for specific
time.
Office Time and Holiday could be configured on page Settings-­>Time
•
Settings-­>Office Time/Holiday page.
If enabled, UCM6510 will automatically alert this extension when a called
party is available, given that a previous call to that party failed for some
reason.
Enable this option to have an external number ring simultaneously along
with the extension.
If a register trunk is used for outbound, the register number will be used to
be displayed for the external number as caller ID number.
Set the external number to be rang simultaneously. '-­' is the connection
character which will be ignored.
Ring the external number simultaneously along with the extension on the
basis of this time condition.
Configure the number of seconds to ring the user before the call is
forwarded to voicemail (voicemail is enabled) or hang up (voicemail is
disabled). If not specified, the default ring timeout is 60 seconds on the
UCM6510, which can be configured in the global ring timeout setting
UCM6510 IP PBX User Manual Page 126 of 317