3. Now you can use domain name instead of IP address to connect to the UCM6510 web UI.
FIREWALL
The UCM6510 provides users firewall configurations to prevent certain malicious attack to the UCM6510
system. Users could configure to allow, restrict or reject specific traffic through the device for security and
bandwidth purpose. The UCM6510 also provides Fail2ban feature for authentication errors in SIP
REGISTER, INVITE and SUBSCRIBE.
To configure firewall settings in UCM6510, go to web GUI->Settings->Firewall page.
STATIC
D EFENSE
Under web GUI->Settings->Firewall->Static Defense page, users will see the following information:
Current service information with port, process and type.
•
Typical firewall settings.
•
Custom firewall settings.
•
The following table shows a sample current service status running on the UCM6510.
Port
7777
389
22
Firmware Version 1.0.2.5
Figure 28: Using Domain Name to Connect to UCM6510
Table 12: UCM6510 Firewall->Static Defense->Current Service
Process
Asterisk
Slapd
Dropbear
UCM6510 IP PBX User Manual
Type
tcp/Ipv4
tcp/Ipv4
tcp/Ipv4
Page 57 of 317