The added options will show in the list. Users can then enter or select value for each option to be used
in the global template. On the left side of each added option, users can click on
option from the template. On the right side of each option, users can click on
value to the default value.
Click on "Save" to save this global template.
•
The created global templates will show in the web UI->PBX->Zero Config->Global Templates page.
•
Users can click on
multiple selected templates at once.
Click on "Toggle Selected Template(s)" to toggle the status between enabled/disabled for the selected
•
templates.
Firmware Version 1.0.2.5
Figure 59: Edit Global Template
to delete the global template or click on "Delete Selected Templates" to delete
UCM6510 IP PBX User Manual
to remove this
to reset the option
Page 96 of 317