Restore Configuration From Backup File - Grandstream Networks UCM6510 User Manual

Enable Backup
Account
Password
Server A ddress
Backup Time
Before saving the configuration, users could click on "Test Connection". The UCM6510 will then try
connecting the server to make sure the server is up and accessible for the UCM6510.
Save the changes and all the backup logs will be listed on the web page.
RESTORE C ONFIGURATION F ROM B ACKUP F ILE
To restore the configuration on the UCM6510 from a backup file, users could go to web
GUI-­>Maintenance-­>Backup-­>Backup / Restore.
A list of previous configuration backups is displayed on the web page. Users could click on
•
desired backup file and it will be restored to the UCM6510.
Firmware Version 1.0.2.5
Figure 182: Data Sync
Table 110: Data Sync Configuration
Enable the auto backup function. The default setting is "No".
Enter the A ccount name on the SFTP backup server.
Enter the Password associate with the Account on the SFTP backup
server.
Enter the SFTP server address.
Enter 0-­23 to specify the backup hour of the day.
UCM6510 IP PBX User Manual
of the
Page 307 of 317