Blf And Event List; Blf; Event List - Grandstream Networks UCM6510 User Manual
Ip pbx
Hide thumbs
Also See for UCM6510:
- User manual (483 pages) ,
- Basic configuration manual (30 pages) ,
- Quick installation manual (21 pages)
Table of Contents
Advertisement
BLF
The UCM6510 supports BLF monitoring for extensions, ring group, call queue, conference room and
parking lot. For example, on the user's phone, configure the parking lot number 701 as the BLF monitored
number. When there is a parked call on 701, the LED for this BLF key will light up in red, meaning a call is
parked against this parking lot. Pressing this BLF key can pick up the call from this parking lot.
--------------------------------------------------------------------------------------------------------------------------------------------
Note:
On the Grandstream GXP phones, the MPK supports "Call Park" mode, which is normally used to park
•
the call by configuring the MPK number as call park feature code (e.g., 700). Users could also use
"Call Park" mode to monitor and pick up the call on this parking lot by configuring the MPK number as
parking lot number (e.g., 701).
--------------------------------------------------------------------------------------------------------------------------------------------
EVENT
L IST
Besides BLF, users can also configure the phones to monitor event list. By using event list, local
extensions on the same UCM6510 or remote extensions on the VOIP trunk can be monitored. The event
list settings is under web GUI->Call Features->Event List.
Click on "Create New Event List" to add a new event list.
•
Click on
to edit the event list configuration.
•
Click on
to delete the event list.
•
Firmware Version 1.0.2.5
BLF
A ND
E VENT
L IST
UCM6510 IP PBX User Manual
Page 238 of 317
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the UCM6510 and is the answer not in the manual?
Questions and answers