Grandstream Networks UCM6510 User Manual page 103

All the selected global templates will take effect. If the same option exists on multiple selected
global templates, the value in the template with higher priority will override the one in the template
with lower priority. Click on
(3) Default Model Template
Default Model Template will be applied to the devices of this model. Default model template can be
configured in model template under web UI-­>PBX-­>Zero Config-­>Model Templates page.
Please see default model template option in
(4) Model Templates
Select a model template to be used for the device and click on
templates can be selected and users can arrange the priority by adjusting orders via
. A ll the selected model templates will take effect. If the same option exists on multiple selected
model templates, the value in the template with higher priority will override the one in the template
with lower priority. Click on
(5) Customize Device Settings
This is the highest level configuration in the "Advanced" settings of the device. Click on "Modify
Customize Device Settings" and following dialog will show.
Firmware Version 1.0.2.5
to remove the global template from the selected list.
[Table 30: Create New Model Template]
to remove the model template from the selected list.
UCM6510 IP PBX User Manual
.
to add. Multiple global
and
Page 102 of 317