Holiday; Figure 46: Settings-­>Time Settings-­>Office Time - Grandstream Networks UCM6510 User Manual

End Time
Week
Show A dvanced Options
Month
Day
Select "Start Time", "End Time" and the day for the "Week" for the office time. The system administrator
can also define month and day of the month as advanced options. Once done, click on "Save" and then
"Apply Change" for the office time to take effect. The office time will be listed in the web page as the figure
shows below.
Click on to edit the office time.
•
Click on to delete the office time.
•
Click on "Delete Selected Office Times" to delete multiple selected office times at once.
•
HOLIDAY
On the UCM6510, the system administrator can define "holiday", which can be used to configure time
condition for extension call forwarding schedule and inbound rule schedule. To configure holiday, go to
Web GUI-­>Settings-­>Time Settings-­>Holiday. Click on "Create New Holiday" to create holiday time.
Firmware Version 1.0.2.5
Configure the end time for office hour
Select the work days in one week.
Check this options to show advanced options. Once selected, please
specify "Month" and "Day" below.
Select the months for office time.
Select the work days in one month.
Figure 46: Settings-­>Time Settings-­>Office Time
UCM6510 IP PBX User Manual Page 75 of 317