System Events; Alert Events List - Grandstream Networks UCM6510 User Manual
Ip pbx
Hide thumbs
Also See for UCM6510:
- User manual (483 pages) ,
- Basic configuration manual (30 pages) ,
- Quick installation manual (21 pages)
Table of Contents
Advertisement
SYSTEM
E VENTS
The UCM6510 can monitor important system events, log the alerts and send Email notifications to the
system administrator.
ALERT
E VENTS
L IST
The system alert events list can be found under web GUI->Status->System Events->Alert Events List.
Click on
to configure the parameters for each event.
1. Disk Usage
Detect Cycle: The UCM6510 will perform the internal disk usage detection based on this cycle.
•
Users can enter the number and then select second(s)/minute(s)/hour(s)/day(s) to configure the
cycle.
Alert Threshold: If the detected value exceeds the threshold (in percentage), the UCM6510
•
system will send the alert.
Firmware Version 1.0.2.5
Figure 156: System Status->Resource Usage
Figure 157: System Events->Alert Events Lists: Disk Usage
UCM6510 IP PBX User Manual
Page 284 of 317
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the UCM6510 and is the answer not in the manual?
Questions and answers