Cancel The Replacement Of A Maintenance Tray - Oce Colorado 1640 Operation Manual

Cancel the replacement of a maintenance tray

Cancel the replacement of a maintenance tray
Introduction
When you open the maintenance drawer the operator panel displays a message that you have to
replace the maintenance tray. When you did this by accident, and you do not have to replace the
maintenance tray you can cancel the replacement.
Procedure
1. The operator panel displays a message you must start the maintenance tray replacement
procedure. Tap on [OK].
The [Tools] icon turns red.
2. Tap on the [Tools] icon.
3. Go to [Maintenance tray].
4. Tap on [Replace].
A new window opens.
5. Tap on [Cancel].
The replacement procedure is canceled, the counters will not be reset.
184 Chapter 8 - Troubleshooting and support