Done By Authorized Océ Technician; Periodical Replacement Of Parts; Periodical Inspection Part List - Oce CS9160 User Manual

5.2 DONE BY AUTHORIZED OCÉ TECHNICIAN
This section describes the periodical part replacement and the periodical inspections required for this printer.
These periodical services ensure the stable printing quality of the printer.

5.2.1 Periodical replacement of parts

Perform periodical replacements according to the table below. These replacements must be executed by an
authorized Océ technician. These replacements are necessary to ensure the best printing quality output.

5.2.2 Periodical inspection part list

Perform periodical inspections according to the table: "Periodical Inspection Part List" and perform cleaning
and part replacement as necessary.
Media guide
Sub platen front surface
Timing fence
(CR encoder detection slit plate)
Rail on the CR guide frame
P_REAR sensor front surface
Part
Maintenance station
Wiper
Damper
Part
Timing
Once a year
Once a year
Once a year
Timing
•
Once a year •
•
•
Once a year •
•
Once a year •
•
Once a year
•
113
User's Guide Océ CS9160 printer
Check point
Media dust accumulation
Foreign objects
Damages
Media dust accumulation
Foreign objects
Damages
Foreign objects
Media dust accumulation
Foreign object
AP-40790 – Rev 2.0 -23/08/2011,