Replace The Waste Toner Box - Oce CPS700 Maintenance Manual

Replace the waste toner box

Introduction
The key operator must replace the waste toner box when the box is full. The
KOM warning icon on the operator panel indicates that key operator
maintenance is required. The screen of the KOM mode shows the message that
the key operator must replace the waste toner box.
Before you begin
In case of preventive maintenance, the key operator must start KOM on the
operator panel. Press the keys for 'System manager' -> 'System' -> 'KOM'
on the operator panel.
In case of corrective maintenance, the error screen appears. Follow the
instructions on the screen.
Enter the KOM PIN code.
If required, select 'Waste toner box'. Press the key for 'Yes'. The system
turns off for maintenance.
General procedure
Attention:
Open the front door.
1
Remove the waste toner box.
2
Put a new waste toner box into the CPG frame.
3
Close the front door.
4
The system maintenance
Take the actions in the described order.
37