Lic-Pip 11 - IBM i 830 Repair Manual

LIC PIPs
4. Select the Perform an IPL option on the IPL or Install the System display to
5. Copy the main storage dump to removable media (see "Copying a Main
6. Report a Licensed Internal Code problem to your next level of support.

LIC-PIP 11

This procedure isolates a system STARTUP failure in the initial program load (IPL)
mode.
Note: Determine if the system has logical partitions. Go to "Determining if the
Note: If the system has logical partitions, perform this procedure from the logical
Read the "Overview" on page 341 before continuing with this procedure.
How to Find the Cause Code:
1. Were you given a cause code by another procedure?
2. Look at the Data display characters in word 3. You can obtain these characters
3. If the cause code is:
0001: Disk configuration is missing.
1. Select Manual mode and perform an IPL to DST (see "Dedicated Service Tools
2. Is Missing Disk Configuration information displayed?
350
iSeries Model 830, 840, SB2, and SB3 Problem Analysis, Repair and Parts V5R1
"Chapter 2. Unit Reference Codes" on page 59). If the procedure for the
new SRC sends you back to this procedure, go to step 5.
This ends the procedure.
complete the IPL.
Is the problem intermittent?
Yes No
↓
This ends the procedure.
Storage Dump" in the iSeries Service Functions information).
This ends the procedure.
System Has Logical Partitions" on page 943, before continuing with this
procedure.
partition that reported the problem.
No Yes
↓
Use the cause code given by the other procedure.
Go to step 3 of this procedure.
by either:
v Looking at word 3 on the Problem Summary Form that was filled out earlier.
v Selecting characters 9-16 of the top 16 character line of function 12 (word 3).
Refer to the 4 leftmost characters of word 3, which are the cause code.
(DST)" in the iSeries Service Functions information).
Does the Disk Configuration Error Report display appear?
Yes No
↓
The IPL completed successfully.
This ends the procedure.
Yes No