IBM i 830 Repair Manual page 393

d. Select each unit in the list which is new to the system. Press enter.
e. Continue the system IPL.
This ends the procedure.
18. None of the resources that are associated with the B600 5311 SRCs are disk
units that were added to the partition, since the last IPL of the partition.
Has a scratch install recently been performed on the partition that is reporting
the error(s)?
No Yes
↓
Go to step 21 of this procedure.
19. A scratch install was not performed.
Was the "Clear configuration data" option recently used to discontinue LPAR
use?
Yes No
↓ The "Clear configuration data" option was not used. Contact your next
level of support.
This ends the procedure.
20. Use the "Clear non-configured disk unit configuration data" option to clear old
configuration data, from the old partition load source disk device(s).
a. Go to SST/DST in the partition, select option "Work with system partitions".
b. From the "Work with system partitions" screen select option "Recover
configuration data".
c. From the "Recover configuration data" screen select the option "Clear
non-configured disk unit configuration data".
d. Select each former load source in the list. Press enter.
e. Continue the system IPL.
This ends the procedure.
21. Was the load source device previously mirrored before the scratch install?
Yes No
↓
Go to step 23 of this procedure.
22. Use the "Clear non-configured disk unit configuration data" option. Clear the old
configuration data from the disk unit that was mirroring the old load source
disk.
a. Go to SST/DST in the partition that is reporting the SRC and select the
"Work with system partitions" option .
b. From the "Work with system partitions" screen select the "Recover
configuration data" option.
c. From the "Recover configuration data" screen select the "Clear non-configured
disk unit configuration data" option.
d. Select the former load source mirror in the list. Press enter.
23. Is the Primary partition reporting the B600 5311 error(s)?
Yes No
↓
This ends the procedure.
24. Does the customer want multiple partitions on the system?
Yes No
Chapter 3. Problem Isolation Procedures (PIPs), Failing Items, and Symbolic FRU Isolation
LPAR PIPs
379