IBM i 830 Repair Manual page 285

Reference Description/Action Perform all actions before exchanging
Code Failing Items
69D8 Bus Expansion Adapter failed
A primary optical link had a failure. Contact with the bus may
still be possible through this link or through a redundant link.
Perform "BUS-PIP1" on page 285.
For this reference code the failing item list presented in the
"Service Action Log" can be different from the failing item list
documented here. That is due to the differences in system
models and features installed.
If the "Service Action Log" is available then use the failing item
list presented there for servicing this reference code.
If the "Service Action Log" is not available then use the failing
item list documented here. By following the procedures in the
symbolic FRUs listed here you will isolate to the correct FRU
list based on system model and features installed.
69E0 Bus Expansion Adapter card failed
An internal error was detected on a remote bus adapter card.
Perform "BUS-PIP1" on page 285.
69E8 Bus Expansion Adapter failed
Redundancy has been lost due to a secondary optical link
failure. Contact with the bus may still be possible through the
primary optical link.
Perform "BUS-PIP1" on page 285.
69F0 Bus Expansion Adapter failed
Contact has been lost to the bus.
Perform "BUS-PIP1" on page 285.
69F8 Bus Expansion Adapter failed
An optical link initialization failure occurred. The number and
configuration of the system buses can not be determined.
Perform "BUS-PIP1" on page 285.
7001 ISDN call in rejected
7002 Lines not selected
7003 Network interfaces not selected
B6xx (including A6xx)
Failing Item Location
FI00182
FI00203
FI00055
LBUSADP
AJDG301
FI00203
AJDG301
FI00203
FI00205
FI00057
AJDG301
FI00180
FI00182
FI00203
FI00056
FI00205
LBUSADP
AJDG301
FI00180
FI00203
FI00182
FI00186
FI00057
AJDG301
GG3COMM
GG3COMM
GG3COMM
Chapter 2. Unit Reference Codes
271