(B6Xx) Lic Reference Codes - IBM i 830 Repair Manual

10. If this did not fix the problem, contact your next level of support.
11. This is a Model 840 or SB3 system. The network interface controller (NIC) card
12. If this did not fix the problem, contact your next level of support.

(B6xx) LIC Reference Codes

Perform the following:
1. Find the SRC in the SRC column of the following table.
2. Perform the actions in the What You Should Do column of the table.
a. Exchange HSL I/O bridge card in location C08. To determine the CCIN,
part number and removal and installation procedure, locate card position
C08 and FRU name "HSL I/O bridge card" from the following:
b.
v For Model 830, SB2 see Table 41 on page 710.
v For Model 840, SB3 see Table 42 on page 720.
4. If this did not fix the problem, exchange the Tower Card in position CB1. To
determine CCIN, part number and removal and installation procedure, locate
card position CB1 and FRU name " Tower Card" from the following:
v For Model 830, SB2 see Table 41 on page 710.
v For Model 840, SB3 see Table 42 on page 720.
5. If this did not fix the problem, contact your next level of support.
This ends the procedure.
6. Is the reference code B4FF00B3?
Yes No
↓
Contact your next level of support.
This ends the procedure.
7. Is this a Model 830 or SB2?
Yes No
↓
Go to step 11 of this procedure.
8. The Clock card in location M06A may be the failing item. To determine the
CCIN, part number, and removal and installation procedure, locate card
position M06A and FRU name "Clock Card" in Table 41 on page 710. Exchange
the failing item.
9. If this did not fix the problem, exchange the network interface controller (NIC)
card. To determine the CCIN, part number, and removal and installation
procedure, locate card position M06 and FRU name "network interface
controller (NIC) card" in Table 41 on page 710.
This ends the procedure.
in location M17 may be the failing item. To determine the CCIN, part number,
and removal and installation procedure, locate card position M17 and FRU
name "network interface controller (NIC) card" in Table 42 on page 720.
Exchange the failing item.
This ends the procedure.
Chapter 2. Unit Reference Codes
B4FF
239