Workstation Adapter Console Failing Items - IBM i 830 Repair Manual

B075
Reference Code Description/Action Perform all actions before exchanging Failing Items
5715 Remote equipment did not respond causing an idle-time-out
5718 Retry limit reached for sending frames to remote equipment
5719 Retry limit reached for sending frames to remote equipment
5720 Retry limit reached for sending poll frame to remote
5721 Could not send frame to remote equipment; local problem
5722 Wrong command value sent by OS/400 licensed program
A000 Too many devices active on the workstation IOP
B000 WS IOP fails to report part, model and serial number
Perform "WSAC-PIP1" on page 477.
C000, D000 WS IOP error not known
D001 Wrong or no external communications cable installed
F003 WS IOA buffer utilization threshold exceeded temporarily
FFFF User believes there is a problem
Reference code FFFF is assigned by the ANZPRB (Analyze Problems) for
user-detected errors. Run ANZPRB again if the problem still exists or look
in the problem log (WRKPRB) for possible failing FRUs.

Workstation Adapter Console Failing Items

Notes:
1. To determine the failing items, go to "Failing Items" on page 479.
2. To determine the associated part numbers, go to "Type, Model, and Part
3. To determine the parts associated with symbolic FRUs, such as "ANYBUS", or
206
iSeries Model 830, 840, SB2, and SB3 Problem Analysis, Repair and Parts V5R1
Number list" on page 885.
"DEVTERM", go to "Symbolic FRUs" on page 495.
Failing Item
GXCLINK
CXCRPTO
FI00701
FI00704
CXCMRTY
FI00705
CXCENCD
FI00700
CXCDTAR
FI00719
GXCLINK
FI00705
FI00704
FI00700
CXCMRTY
FI00719
FI00701
FI00700
FI00700
CXCMODU
FI00704
CXCDTAR
FI00701
FI00719
FI00730
AJLAG01
CXCSTAD
GXCBBBB
FI00615
AJLAG01
FI00631
AJLAG01
AJLAG01
UXCFF00