Bus Pip Hsl-08 - IBM i 830 Repair Manual

return to the "Packaging Resources Associated with a Logical Resource"
display. Then continue with step 10 of this procedure
10. Select the "Cancel" function to return to the "Logical Hardware Associated With
HSL Loops" display.
11. Repeat step 9 for each HSL I/O Bridge under the loop. When you have
completed performing step 9 for each HSL I/O Bridge, then continue with the
next step in this procedure.
12. Did you record find more than one HSL I/O Bridge with the same frame ID?
No Yes
↓
You have recorded the resource name, the Type-Model, and the Power
Controlling system of every frame on the loop that matches the frame
ID that you are looking to find.
This ends the procedure.
13. There is only one frame on the loop with the frame ID you are working with.
Return to the procedure that sent you here.
This ends the procedure.

Bus PIP HSL-08

Starting with the frame ID and HSL port location label for one end of an HSL
cable, determine the frame ID and port location label for the other end.
1. Sign on to SST or to DST if you have not already done so.
2. Select "Start a Service Tool".
3. Select "Hardware Service Manager".
4. Select "Logical Hardware Resources".
5. Select "High Speed Link (HSL) Resources".
6. Move the cursor to the HSL loop that you are here to examine. Select the
"Resources associated with loop" option.
7. Select the "Include non-reporting resources" function.
8. The display that appears is showing the loop resource and all the "HSL I/O
Bridge" and all the "Remote HSL NIC" resources connected to the loop.
9. Perform the following for each of the HSL I/O Bridge resources listed until
you are directed to do otherwise:
a. Move the cursor to the HSL I/O Bridge resource and select the option
"Associated packaging resource(s)".
b. Compare the frame ID on the display with the frame ID (in hexadecimal
format) that you are looking to find (Ignore leading zeros).
Are the frame IDs the same?
No Yes
↓
Go to step 12 of this procedure.
10. Select the "Cancel" function to return to the "Logical Hardware Associated With
HSL Loops" display.
11. Repeat step 12 for each HSL I/O Bridge resource under the loop until you are
directed to do otherwise.
This ends the procedure.
12. Perform the following:
a. Select the "Associated logical resource(s)" option.
Chapter 3. Problem Isolation Procedures (PIPs), Failing Items, and Symbolic FRU Isolation
Bus, High-Speed Link (HSL) PIPs
307