Tape Unit Failing Items; (6A59) Workstation Adapter Console Reference Codes - IBM i 830 Repair Manual

63A0
Reference Code Description/Action Perform all actions before exchanging Failing Items
9900 Licensed Internal Code for tape unit was not upgraded
The I/O processor loading of Licensed Internal Code (LIC) to the
programmable tape unit was not completed.
The tape unit will continue to operate with the previous LIC. You may do
either of the following:
v Wait for next IPL when the system will attempt to load the LIC for the
tape drive again.
v Perform "TU-PIP4" on page 453 to reset the IOP and the tape unit. When
the IOP is reset, if the device has the wrong level of LIC, the IOP will
attempt to load the new LIC.
FFF6 Tape volume statistics logged (no action required)

Tape Unit Failing Items

Notes:
1. To determine the failing items, go to "Failing Items" on page 479.
2. To determine the associated part numbers, go to "Type, Model, and Part
3. To determine the parts associated with symbolic FRUs, such as "ANYBUS", or
Failing Item Description
ANYFC Any Fibre Channel device
DEVTERM Terminating plug
FCCABLE Fibre Channel cable
FCCODE Gateway device Licensed Internal Code
FCDEV Fibre Channel device
FCGATE Gateway device
FCIOA Fibre Channel IOA
MH7TMED Defective removable media
UH7CLN Tape unit needs cleaning
UH7CNFG Tape configuration detected by I/O processor;
not valid
UH7USER Operator action required

(6A59) Workstation Adapter Console Reference Codes

The workstation adapter console detected a failure.
1. Look at characters 5 through 8 of the top 16 character line of function 11 (4
2. Find the unit reference code in the following table.
Notes:
1. If the failing item is a failing item (FI) code, go to "Failing Items" on page 479
160
iSeries Model 830, 840, SB2, and SB3 Problem Analysis, Repair and Parts V5R1
Number list" on page 885.
"DEVTERM", go to "Symbolic FRUs" on page 495.
rightmost characters of word 1). These 4 characters are the unit reference code.
to determine which part number associated with the FI code is failing.
Document Description
Problem Analysis; Symbolic FRU Isolation
Problem Analysis; Symbolic FRU Isolation
Problem Analysis; Symbolic FRU Isolation
Problem Analysis; Symbolic FRU Isolation
Problem Analysis; Symbolic FRU Isolation
IBM SAN Data Gateway Service Guide
Problem Analysis; Symbolic FRU Isolation
Magnetic tape subsystem service information
Magnetic tape subsystem operator's information
Installation
System operation information
Failing Item
UH7USER