IBM i 830 Repair Manual page 280

B6xx (including A6xx)
Reference Description/Action Perform all actions before exchanging
Code Failing Items
69C1 A failure occurred on another system
Perform "BUS-PIP1" on page 285.
69C2 Information only, no service action required. HSL OptiConnect
normal connection to another system or partition.
This reference code is informational only.
HSL Opticonnect has established connection normally. The local
system or partition is participating in HSL Opticonnect with
other systems or partitions on the same HSL loop.
69C3 Information only, no service action required. Opticonnect
normal remote disconnection from OptiConnect participation.
This reference code is informational only.
HSL Opticonnect disconnected normally from a remote node.
The local system or partition has stopped participating in HSL
Opticonnect with the remote system or partition on the same
HSL loop. Possible reasons include:
v A remote system or partition went off line due to a normal
power off or disable of HSL Opticonnect
69C5 I/O processor failure
The OptiConnect/400 card which connects this system to
another system has failed. The failing card is located in an I/O
processor card slot.
Perform "BUS-PIP1" on page 285.
266
iSeries Model 830, 840, SB2, and SB3 Problem Analysis, Repair and Parts V5R1
Failing Item Location
FI01040
FI00206
FI00182
AJDG301
FI00206
FI01040
AJDG301