Addresses - Fc 5078/0578 Pci Expansion Unit - IBM i 830 Repair Manual

Locations and Addresses
Addresses — FC 5078/0578 PCI Expansion Unit
Use the address to find the location. Then go to "Locations — FC 5078, 0578 PCI
Expansion Unit" on page 743 to find additional information.
776
iSeries Model 830, 840, SB2, and SB3 Problem Analysis, Repair and Parts V5R1
Table 51. IOP, IOA, and device address information for FC 5075 (continued)
Position Possible Failing Item DSA (BBBBCcbb)
C04 Storage IOA
Comm/Wkst IOA
IXS attached IOA
C05 (IXS capable IOP
position)
C06 (empty if IXS in Storage IOA
C05)
Comm/Wkst IOA
C07 IOP
Storage IOA
Comm/Wkst IOA
IXS attached IOA
C08 Storage IOA
Comm/Wkst IOA
IXS attached IOA
D01 Disk Unit
D02 Disk Unit
D03 Disk Unit
D04 Disk Unit
D05 Disk Unit
D06 Disk Unit
Unit Address
Note: IOA and
device DSA's will not
follow the rules
below if the IOA is
manually reassigned
after IPL.
The IOA has the 6FFFFFFF
same DSA as the first
E6FFFFFF
IOP found in the
following list: C03,
E206FFFF
C02, CB1.
yyyy-10-00 FFFFFFFF
yyyy-10-00 2FFFFFFF
yyyy-10-00 E2FFFFFF
yyyy-14-00 FFFFFFFF
yyyy-10-00 4FFFFFFF
yyyy-10-00 E4FFFFFF
yyyy-10-00 E004FFFF
The IOA has the 6FFFFFFF
same DSA as the first
E6FFFFFF
IOP found in the
following list: C07,
E006FFFF
C05.
xxxx-10-00 1z0100FF (where z is
0, 1 or 2)
xxxx-10-00 1z0200FF (where z is
0, 1 or 2)
xxxx-10-00 1z0300FF (where z is
0, 1 or 2)
xxxx-10-00 1z0400FF (where z is
0, 1 or 2)
xxxx-10-00 1z0E00FF (where z is
0, 1 or 2)
xxxx-10-00 1z0F00FF (where z is
0, 1 or 2)