Bus Pip Hsl-05 - IBM i 830 Repair Manual

a. Wait 1 minute.
b. Select the Cancel function.
c. Select the Refresh function.
d. Select the Display detail option for the failing resource.
26. Determine if the link has become "operational" by repeating steps 1 on page 303
through 14 on page 304 of this procedure for a second time.
Note: Return to the procedure that sent you here, when you are directed to
do so in steps 1 through 14 of this procedure.
This ends the procedure.

BUS PIP HSL-05

BUS PIP HSL-05, Use HSM to record the configuration and status of the loop.
1. Make a copy of "Appendix F. HSL Loop Configuration and Status Form" on
page 963. You will be directed to fill in specific areas of the table. Fill in the
HSL loop number directly above the table.
2. Sign on to SST or DST.
3. Select "Start a service tool".
4. Select "Hardware service manager".
5. Select "Logical hardware resources".
6. Select "High-speed link (HSL) resources".
7. Move the cursor to the HSL loop that you are here to examine. Select the
"Display detail" option.
8. Select the function "Include non-reporting resources".
9. The display that appears is showing the port status of the Network Interface
Controller (NIC) for the loop that you selected. Starting in the first row of the
table, record the resource type, name, and the system/tower – type, model, or
feature code (FC).
10. In the second column, record the frame ID and HSL port number of the
leading port.
11. In the third column, record the status of the leading port (failed or operational).
12. Select function "Follow Leading Port".
13. Record the HSL port number and the frame ID of the trailing link.
14. Record the resource type, name, and the system/tower – type, model, or
feature code (FC).
15. Is the resource name the same name that you recorded for the NIC in step 9
of this procedure?
No Yes
↓
You have followed the HSL links around the loop and back to the NIC
on the system. Return to the procedure that sent you here.
This ends the procedure.
16. The display that appears is showing the status of the HSL ports for the next
HSL resource on the loop.
17. Go to the next row in the table and record the resource type, name, and the
system/tower – type, model, or feature code (FC). Go to step 10 of this
procedure.
This ends the procedure.
Chapter 3. Problem Isolation Procedures (PIPs), Failing Items, and Symbolic FRU Isolation
Bus, High-Speed Link (HSL) PIPs
305