IBM i 830 Repair Manual page 126

1xxx
Reference Code Description/Action Perform all actions before exchanging Failing Items
9234 Unsupported Packet Size status
Unsupported Packet Size occurred during STF and Secondary Node
Command processing.
9235 SPCN Secondary Node Timeout status
An SPCN Secondary Node Timeout occurred during Command processing.
If the failing secondary node is in a 9406 Expansion Unit (FC 504x), go to
the "Analyzing Problems" section in the in the SY44-4934-00, FC 504x
Problem Analysis and Repair and Parts information.
9236 Frame Timeout status
An SPCN Frame Node Timeout occurred during Network post processing.
9238 Secondary Node Fault
An SPCN Secondary Node Fault occurred during Command processing.
9239 Frame Node Fault
An internal error in the SPCN frame node prevents the running of a Frame
command.
923A ASA Failure
The frame address returned by a secondary node does not match the
address of the frame.
923B Invalid Packet Length for data sent.
An Invalid Packet Length occurred for data exchanged.
9280 Response Stack Overflow
Too many responses were received during System Frame command
processing.
9281 Response Overrun
Response Overrun occurred during System Frame processing.
9282 No Free Entries
No free entries were found during System Frame processing.
9283 ARA Failure
An Assign Frame Address Failure occurred during ARA Preprocessing.
9284 Undefined status
Undefined Status occurred during Frame or STF processing.
9285 BCC Fault
A BCC Error was detected during Network post processing.
9286 Length Check Error.
Length Check occurred during SPCN post processing.
9287 Undefined status
Undefined Status occurred during Command processing.
112
iSeries Model 830, 840, SB2, and SB3 Problem Analysis, Repair and Parts V5R1
Failing Item
TWRCARD
CTLPNL
SVCPROC
TWRCARD
AJDG301
CBLALL
TWRCARD
CBLALL
TWRCARD
AJDG301
TWRCARD
AJDG301
TWRCARD
AJDG301
AJDG301
TWRCARD
CBLALL
AJDG301
TWRCARD
CBLALL
AJDG301
TWRCARD
CBLALL
AJDG301
TWRCARD
TWRCARD
AJDG301
TWRCARD
AJDG301
TWRCARD
TWRCARD
AJDG301
TWRCARD
AJDG301