IBM i 830 Repair Manual page 763

Table 47. FRU locations and Failing Components for Integrated xSeries Adapter Card (IXA)
— Machine Type 1519
Position FRU Name
Position Integrated
depends on xSeries Adapter
xSeries Server
machine type
and model.
To locate,
follow the HSL
cable
connections or
the SPCN cable
connections to
the Integrated
xSeries Adapter
card.
HSL cables on HSL cable
the HSL ports
Locations and Addresses
Possible Type, CCIN, or
Failing PN
Component
The failing CCIN = 2689
component is listed under
either: machine type
1519.
v HSL I/O
Note: machine
Bridge
type 1519 is not
v Multi -
an iSeries
adapter
machine type
Bridge
or an xSeries
v SPCN
machine type.
v Embed - ded
Machine type
1519 was
IOP
created to list
v Card
feature 2689
Backplane
separately from
iSeries and
xSeries machine
types.
HSL connection See "Type,
Model, and
Part Number
list" on
page 885.
Chapter 5. Locations, Addresses, and Part Listings
Remove/Install
Procedure
Go to "Type 2689 –
Integrated xSeries
Adapter (IXA)" on
page 683.
Note: Verify the
frame ID by
examining the frame
ID displayed on the
card's LED which is
visible when the
panel covering the
card is removed.
Note: In an OS/400
Opticonnect
environment it is
possible to have
multiple xSeries
Servers with the
same frame ID
displayed but the
power controlling
system is different
than the system you
are servicing. Verify
the SPCN cable is
connected to the
system you are
servicing.
Go to "HSL Cables –
Concurrent" on
page 653.
749