IBM i 830 Repair Manual page 92

1xxx
Reference Code Description/Action Perform all actions before exchanging Failing Items
0519 Timeout, no action detected. Reinitialize the operation.
No action was detected for the installation or removal of disk unit 10, and
the bus was released.
You must reinitialize the operation to continue.
051A Timeout, no action detected. Reinitialize the operation.
No action was detected for the installation or removal of disk unit 11, and
the bus was released.
You must reinitialize the operation to continue.
051B Timeout, no action detected. Reinitialize the operation.
No action was detected for the installation or removal of disk unit 12, and
the bus was released.
You must reinitialize the operation to continue.
051C Timeout, no action detected. Reinitialize the operation
No action was detected for the installation or removal of device 3, and the
bus was released.
You must reinitialize the operation to continue.
051D Timeout, no action detected. Reinitialize the operation
No action was detected for the installation or removal of disk unit K15,
and the bus was released.
You must reinitialize the operation to continue.
051E Timeout, no action detected. Reinitialize the operation
No action was detected for the installation or removal of disk unit K16,
and the bus was released.
You must reinitialize the operation to continue.
051F Timeout, no action detected. Reinitialize the operation
No action was detected for the installation or removal of device 4, and the
bus was released.
You must reinitialize the operation to continue.
0700 Timeout, no action detected. Reinitialize the operation
Disk unit 1 was powered off but not removed.
Concurrent maintenance informational reference code.
0701 Timeout, no action detected. Reinitialize the operation
Disk unit 2 was powered off but not removed.
Concurrent maintenance informational reference code.
0702 Timeout, no action detected. Reinitialize the operation
Disk unit 3 was powered off but not removed.
Concurrent maintenance informational reference code.
You must reinitialize the operation to continue.
78
iSeries Model 830, 840, SB2, and SB3 Problem Analysis, Repair and Parts V5R1
Failing Item