(A1Xx, B1Xx) Service Processor Reference Codes - IBM i 830 Repair Manual

Table of Contents

Advertisement

(A1xx, B1xx) Service Processor Reference Codes

If the SRC is A1xx 3xxx, see Working with Storage Dumps in the iSeries Service
Functions information.
If the SRC is A1xx 8xxx, go to "Powering Off the System" on page 923.
1. Look at the 4 rightmost characters of the Data display for function 11. These 4
2. Find the unit reference code in the following table.
Notes:
1. If the failing item is a failing item (FI) code, go to "Failing Items" on page 479
2. If the failing item is a type number, go to "Type, Model, and Part Number list"
3. If the failing item is a symbolic FRU, go to "Symbolic FRUs" on page 495 to
Reference
Description/Action Perform all actions before exchanging
Code
Failing Items
1000, 1002, 1005 Service processor card failure
1007 to 1008
Service processor real time clock problem
100E to 100F,
Service processor card failure
1300
1360
Service processor reset was issued
LIC has detected a problem with the Service processor and has
reset it but has not initiated reload of the Service processor.
Some system service operations have been suspended and the
system should be scheduled for power down as soon as
possible. Perform a system IPL. If no PTFs are available to fix
this problem, send the Service processor dump in to IBM.
1370, 1380
Service processor card failure
1381
Service processor card failure
1384
Service processor card failure
1387
Service processor card failure
The Licensed Internal Code could not allocate resources on the
Service processor.
1400 to 1401,
Service processor card failure
1670, 1672,
1675, 1681 to
1683, 4600
4601
System Card(s) or BackPlane
4602
Any device attached to Bus 1
Failing Item Description
ULYUSR1
Operator action required
ULYWAIT
Wait to next IPL or perform TU-PIP4
characters are the unit reference code.
to determine which part number associated with the FI code is failing.
on page 885 to determine the part number.
determine the part number.
Document Description
Magnetic tape subsystem operator's
information
Problem Analysis
Failing Item
Location
SVCPROC
SVCPROC
SVCPROC
AJDGP01
AJDG301
SVCPROC
SVCPROC
AJDGP01
SVCPROC
SVCPROC
SVCPROC
SVCPROC
SYSUNIT
BUS1
Chapter 2. Unit Reference Codes
9427
179

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

I sb3I 840I sb2

Table of Contents