IBM i 830 Repair Manual page 161

Table of Contents

Advertisement

10. Look at the 4 rightmost characters of the Data display for word 1. These 4
11. If the 3590 indicator panel shows a FRU identifier (FID) code, see the "Start"
12. See "SRC Address Formats" on page 936 to determine the IOP, IOA, and
13. Find the unit reference code in the following table.
14. See the "Start" section of the 3590 service information.
Notes:
1. If the failing item is a failing item (FI) code, go to "Failing Items" on page 479
2. If the failing item is a type number, go to "Type, Model, and Part Number list"
3. If the failing item is a symbolic FRU, go to "Symbolic FRUs" on page 495 to
Reference Code
Description/Action Perform all actions before exchanging Failing Items
9020
I/O processor detected a SCSI bus configuration error
Before exchanging any parts, verify that the following conditions are not
present:
v Tape and DASD devices attached to an I/O processor that does not
support tape and DASD devices at the same time.
v A device type or model that is not given support
9100
Interface error detected by I/O processor or by tape unit
Before exchanging any parts, do the following:
1. Ensure that an interposer is connected between the I/O processor and
the SCSI cable.
2. Ensure that the SCSI cable between the interposer and the device is
seated correctly, and that there are no bent or damaged pins on the
SCSI cable.
3. Ensure that a terminating plug is attached to the device end of the SCSI
cable.
7. Start a type D IPL from the system unit control panel.
8. Does the IPL complete successfully?
No
Yes
The problem has been corrected.
This ends the procedure.
9. Obtain another copy of the tape. Repeat steps 6 and 7 using the new tape. If
this does not correct the problem, continue with step 10.
characters are the unit reference code.
section of the 3590 service information.
device address.
to determine which part number associated with the FI code is failing.
on page 885 to determine the part number.
determine the part number.
Failing Item
UHQCNFG
FI00851
FI00130
FI00851
FI00131
05H3834
EXTSCSI
61G8324
Chapter 2. Unit Reference Codes
3590
147

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

I sb3I 840I sb2

Table of Contents