IBM i 830 Repair Manual page 190

Table of Contents

Advertisement

9427
176
iSeries Model 830, 840, SB2, and SB3 Problem Analysis, Repair and Parts V5R1
Reference
Description/Action Perform all actions before exchanging
Code
Failing Items
9302
Tape device failure or media error
The tape unit detected a failure that may be caused by a
hardware failure or a media error.
Refer to the tape unit service information for possible
information on diagnostic tests that can be run to isolate
between hardware and media failures.
9310
Licensed Internal Code for the tape unit is not correct
9320
Tape device Licensed Internal Code failure
9350
Tape unit detected a read or write error on tape medium
A permanent read or write error occured. Clean the tape
unit and retry the operation.
If cleaning the tape unit does not correct the problem,
exchange the tape media.
9351
Tape with excessive error rate was mounted in tape
device.
The tape unit detected that the mounted tape cartridge has
a history of excessive read and write errors. It is
recommended that you exchange the tape cartridge.
9355
The data format is incorrect; the tape cannot be read
The tape unit has detected that the data format on the
tape media is not supported.
Clean the tape unit and retry the operation.
If the operation continues to fail, use a different tape
cartridge.
9500
I/O processor Licensed Internal Code error
If the system is operational, take a dump of the I/O
processor data. For more infomration, see the iSeries Service
Functions information or ask your next level of support for
assistance.
9600
Equipment Check Failure on Library Device.
See library device service information to resolve the error.
9800 to 9803
I/O processor successfully recovered from temporary error
No action required. This reference code is logged for
information only.
9810
Problem analysis has determined a part should be
replaced.
This reference code is used for ending Online Problem
Analysis with a list of failing items. (Information only)
Failing Item
MLYTMED
86G9251
86G9251
FI00130
FI00130
86G9251
MLYTMED
86G9251
MLYTMED
ULYCLN
86G9251
ULYUSR1
MLYTMED
ULYCLN
86G9251
FI00130
LIBDEV

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

I sb3I 840I sb2

Table of Contents