IBM i 830 Repair Manual page 139

Table of Contents

Advertisement

Reference Code
Description/Action Perform all actions before exchanging Failing Items
2202
Removable media error during IPL
3000
A permanent I/O processor failure occurred
3001
Not valid condition in I/O Processor Licensed Internal Code
The Licensed Internal Code found a condition that should not have
occurred.
3002
Addressed device failed to respond to selection
Perform "SDIOP-PIP16" on page 407.
3006
System bus error
3020
I/O processor detected a SCSI bus configuration error
Error occurred on SCSI bus 0. To correct or isolate a possible user error or
configuration error, perform "SDIOP-PIP17" on page 410. Use the failing
item (FI) codes to find failing devices.
3021
I/O processor detected a SCSI bus configuration error
Error occurred on SCSI bus 1. To correct or isolate a possible user error or
configuration error, perform "SDIOP-PIP17" on page 410. Use the failing
item (FI) codes to find failing devices.
3022
I/O processor detected a SCSI bus configuration error
Error occurred on SCSI bus 2. To correct or isolate a possible user error or
configuration error, perform "SDIOP-PIP17" on page 410. Use the failing
item (FI) codes to find failing devices.
3080
I/O processor Licensed Internal Code error
3081
System log entry only, no service action required
3084
I/O processor card or Licensed Internal Code error
A microprocessor exception occurred on the I/O processor.
3087
I/O processor resource not available
The Licensed Internal Code could not allocate resources on the I/O
processor card.
3100
I/O processor card detected interface error
Error occurred on SCSI bus 0.
Perform "SDIOP-PIP13" on page 404.
3101
I/O processor card detected interface error
Error occurred on SCSI bus 1.
Perform "SDIOP-PIP13" on page 404.
2749, 2767, 2768, 2842, 2843, 284B
Failing Item
FI00022
FI01105
FI01101
IOP
MA_BRDG
IOP
AJDGP01
FI01105
STORIOA
FI01140
FI01141
FI01106
IOP
ANYBUS
FI01101
USER
FI01107
STORIOA
USER
FI01107
STORIOA
USER
FI01107
STORIOA
AJDGP01
AJDGP01
IOP
FI01104
MA_BRDG
AJDGP01
AJDG301
IOACNFG
FI01104
STORIOA
FI01107
FI01140
BACKPLN
STORIOA
FI01107
FI01140
BACKPLN
Chapter 2. Unit Reference Codes
125

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

I sb3I 840I sb2

Table of Contents