Step 154B-7; Step 154B-8; Step 154B-9; Step 154B-10 - IBM pSeries 630 6C4 Service Manual

Step 154B-7

Have all the cards listed in "Step 154B-4" on page 155 been replaced?
No Go to "Step 154B-2" on page 155.
Yes Go to "Step 154B-8".

Step 154B-8

Turn off the power.

Step 154B-9

Ensure that the power is off on the base system drawer.

Step 154B-10

Attention: Before replacing the processor backplane, call for support.
Replace the processor backplane at U0.1-P1, if not already replaced..

Step 154B-11

Turn on the power.

Step 154B-12

Did the system stop with the same error code as recorded in "Step 154B-1" on page 155?
No The card just replaced was defective. This ends the procedure.
Return the system to its original configuration.
Go to "MAP 0410: Repair Checkout" in the RS/6000 Eserver pSeries Diagnostic Information for
Multiple Bus Systems.
Yes Go to "Step 154B-13".

Step 154B-13

Turn off the power.

Step 154B-14

Call for support. This ends the procedure.
156 Eserver pSeries 630 Model 6C4 and Model 6E4 Service Guide