IBM i 830 Repair Manual page 172

Table of Contents

Advertisement

63A0
Reference Code
Description/Action Perform all actions before exchanging Failing Items
9102
Gateway device detected a SCSI interface error
Use the gateway device service documentation to analyze the problem.
9200
I/O processor addressed the tape unit; no response
If the attached device is an external device, do the following before
exchanging any parts:
1. Ensure that the device is powered on.
2. If an interposer is required, make sure that it is connected between the
I/O processor and the SCSI cable.
3. Ensure that the SCSI cable is seated correctly, and that there are no bent
or damaged pins on the SCSI cable.
4. Ensure that a terminating plug is attached to the device end of the SCSI
cable.
9201
Tape unit command timeout
If the attached device is an external device, do the following before
exchanging any parts:
1. Ensure that the device is powered on.
2. If an interposer is required, make sure that it is connected between the
I/O processor and the SCSI cable.
3. Ensure that the SCSI cable is seated correctly, and that there are no bent
or damaged pins on the SCSI cable.
4. Ensure that a terminating plug is attached to the device end of the SCSI
cable.
9202
Tape unit failed after Licensed Internal Code was loaded
If the attached device is an external device, do the following before
exchanging any parts:
1. Ensure that the device is powered on.
2. If an interposer is required, make sure that it is connected between the
I/O processor and the SCSI cable.
3. Ensure that the SCSI cable is seated correctly, and that there are no bent
or damaged pins on the SCSI cable.
4. Ensure that a terminating plug is attached to the device end of the SCSI
cable.
9210
Illegal or unsupported tape unit response
9211
Gateway device detected a bus protocol error
Use the gateway device service documentation to analyze the problem.
9300
Tape unit failure
9301
Tape device failure, redundancy lost
The tape unit detected a hardware failure that does not prevent the tape
unit from completing the current operation.
158
iSeries Model 830, 840, SB2, and SB3 Problem Analysis, Repair and Parts V5R1
Failing Item
FI00871
FCGATE
FI00872
DEVTERM
FI00871
FI01112
FI00872
DEVTERM
FI00871
FI01112
FI00872
DEVTERM
MH7TMED
FI00871
FI01112
FI00872
DEVTERM
FI00871
FI01112
FI00130
FCGATE
FCIOA
FI00871
ANYFC
FCCABLE
FI00872
DEVTERM
FI00871
FI00871

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

I sb3I 840I sb2

Table of Contents