IBM i 830 Repair Manual page 316

Bus, High-Speed Link (HSL) PIPs
15. Find the information for the other (second) failing resource using the following
16. Have you repeated steps 1 through 15 for a second time during this
17. Does the "first" failing resource and the "second" failing resource have the same
18. The following steps guide you through disconnecting and reconnecting the
302
iSeries Model 830, 840, SB2, and SB3 Problem Analysis, Repair and Parts V5R1
e. Select the Associated packaging resources option for the HSL I/O adapter
with the resource name that you recorded.
f. Record the frame ID, card position, and port. Record this information for
the "first" failing link in "Appendix G. HSL Link Status Diagnosis Form" on
page 967.
g. Select the Display detail option and record the card position for the "first"
failing resource.
steps:
a. Record this information as the "second" failing resource on the link.
b. Select the Cancel function to return to the "Packaging resource associated with
a logical resource" display.
c. Select the Cancel function again, to return to the "Logical hardware associated
with HSL ring" display.
d. Select the Display detail option for the HSL I/O adapter with the name of
the "first" failing resource.
e. Select the Follow leading port" function.
f. You have located the "second" failing resource on the link.
g. Record the resource name, card type-model, part number, port.
h. Select the Cancel function to return to the "Logical hardware associated HSL
rings" display.
i. Select the Associated packaging resources option for the HSL I/O adapter with
the resource name that you recorded for the "second" failed resource.
j. Record the frame ID, card position, and port. Record this information for
the "second" failing link in "Appendix G. HSL Link Status Diagnosis Form"
on page 967.
k. Select the Display detail option and record the card position for the "second"
failing resource.
procedure?
No Yes
↓
Return to the procedure that sent you here.
This ends the procedure.
frame ID?
No Yes
↓
Return to the procedure that sent you here.
This ends the procedure.
HSL cable connection between the first and second failing resources to
determine if the cable connectors are properly seated:
a. Disconnect the cable at the frame ID, card position, and port that you
recorded for the "first" failing resource, then wait 30 seconds and reconnect
it.