Replacement Of Drive Belt; Replacement Of Engine Oil - Mazda B-Series 1997 Workshop Manual

A
SCHEDULED MAINTENANCE SERVICES
2.3L WITH N C
/
GENERATOR
TENSIONER
I
I
CRANKSHAFT
NC-PS
REPLACEMENT OF DRIVE BELT
1. On the 2.3L engine, loosen the drive belt tension by
lifting the tensioner pulley in the counterclockwise
direction.
MN1172-D
4.0L
BELT TENSION CHECK
I
I
MN1148-D
TENSIONER CRANKSHAFT
3.0L
AIR
GENERATOR
REPLACEMENT OF ENGINE OIL
2. On the 3.OL engine, loosen the drive belt tension by lifting
the tensioner pulley in the clockwise direction.
Warning
Be careful when draining; the oil is hot.
IDLER
CONDITIONING
3.
Remove and replace the drive belt. Lift the drive belt
LESS AIC
tensioner and slide the drive belt under the drive belt
POWER
STEERING
tensioner. Release the drive belt tensioner to rest on the
drive belt.
WATER
PUMP
1 . Warm up the engine to normal operating temperature and
stop it.
2. Remove the oil filter cap and the oil pan drain plug.
3.
Drain the oil into
a
suitable container.
I
I
MA1011-B 6BUOAX-004
4.
Install a new gasket and the oil pan drain plug.
Tightening torques:
2.3L: 21-33 N-m (2.0-4.3 kgf-m, 15-24 ft-lbf)
3.OL: 14 N-m (1.3 kgf-m, 10 ftelbf}
4.OL: 21-28 N-m (2.1-2.8 kgf-m, I S 2 1 ft-lbf)