Replacement Of Engine Oil Filter; Oil Capacity Table; Replacement Of Engine Timing Belt (2.3L Only) - Mazda B-Series 1997 Workshop Manual

SCHEDULED MAINTENANCE SERVICES
5. Refill the engine with the specified type and amount of
engine oil.
I I
Note
I
KEEP THE OIL IN THIS RANGE
I
OIL LEVEL MAY BE
IN THIS RANGE
AFTER AN OIL CHANGE
The oil level should be filled to the top of the
crosshatched part of the oil dipstick.
Engine oil replacement
4.7 {5.0,4.2) 4.25 I4.5, 3.8) 4.7 {5.0, 4.2)
Lwifh
oil filter)
1
/
I 1
MA1 000-E
Oil capacity
liters {US
qt,
Imp q t )
6. Refit the oil filler cap.
7. Run the engine and check for leaks.
8. Check the oil level and add oil if necessary.
Engine type
Engine oil replacement
REPLACEMENT OF ENGINE TIMING BELT
(2.3L ONLY)
Refer to Section B1.
2.3L
3.8 i4.0, 3.4)
REPLACEMENT OF ENGINE OIL FILTER
1. Place a drip pan under the oil filter.
2. Unscrew the oil filter.
3. Use aclean rag to wipe off the mounting surface on the oil
filter adapter.
4. Apply a small amount of clean engine oil to the O-ring of
the new filter.
5. Install the oil filter and tighten it by hand until the O-ring
contacts the oil filter adapter.
6. Tighten the oil filter 112 turn.
~ ~ 1 0 0 9 - A ~~BUOAX-005
Tightening torque:
2.3L:
13-15 N - m (132-153 kgfecm, 115-133 inalbf)
7. Start the engine and check for leaks.
8. Check the oil level and add oil if necessary.
Oil filter capacities:
2.3L and 4.OL:
0.9 liters (1.0 US qt, 0.9 Imp qt)
3.0L:
0.47 liters (0.5 US qt, 0.42 Imp qt)
A-I I