Timing Chain Assembly (4.0L) - Mazda B-Series 1997 Workshop Manual

ASSEMBLY
Tightening torque:
3 2 N.m (3.3 kgf.m, 2 4 ft.lbf)
+
90
degrees
Caution
The bolts should be tightened gradually; two turns
at a time.
Note
Apply clean engine oil to the rocker arm
assemblies.
Cylinder head cover gaskets and bolts
Refer to page B3-16.
TIMING CHAIN
1. Assemble in the order shown, referring to Assembly Note.
2. Install the timing chain pulley key.
1. Guide 4. Camshaft pulley
Assembly Note ................................ below
Assembly Note ...................... page B3-59
2. Timing chain pulley
5. Timing chain auto tensioner
Assembly Note ...................... page B3-59
Assembly Note ...................... page 83-59
3. Timing chain
Assembly Note ...................... page 63-59
Assembly Note
Guide
Tightening torque:
10-1 2 N-m (1 .O-1.2 kgf-m, 7.4-4.8 ft-lbf)
4611083-1 41