Shift Shaft Lever; Shift Shaft; Ring Gear; Front Output Shaft Bearing - Mazda B-Series 1997 Workshop Manual

MANUAL SHIFT TRANSFER CASE
Shift shaft lever
1. Move the shift shaft lever to the 4L position, then up two
detents to the 4H position. Mark the transfer case in
relation to the position of the shift shaft lever.
2.
Remove the nut and shift shaft lever.
Shift shaft
1.
Remove the clip from the shift shaft.
2. Pry the shift shaft out of the transfer case.
3.
Remove the O-ring from the second groove in the shift
shaft. Discard the O-ring.
4BUOJ2-044
MJ1025-B 4BUOJ2-043
Ring gear
Use a press to remove the ring gear.
Note
Note the relation of the serration to the chamfered
pilot diameter during removal.
4BUOJ2-045
Front output shaft bearing (Transfer case side)
1. Remove the snap ring.
2.
Remove the front output shaft bearing using a drift and
the SST.
Note
SST number: 49 H033 101 Step Plate Adapter Set
Front output shaft bearing (Chain cover side)
Remove the front output shaft bearing using the SSTs.