Mazda B-Series 1997 Workshop Manual page 88

DISASSEMBLY
Disassembly Note
Camshaft oil seal
Remove the camshaft oil seal using the SSTs.
Note
SST number: 49 UNOl 080 Seal Remover and
49 0223 6308 Impact Slide Hammer.
5BUOB1-089
Camshaft thrust plate
Remove the camshaft thrust plate.
Camshaft
Remove the camshaft.
Caution
Remove the camshaft carefully to avoid damaging
the journals and lobes.
5BUOB1-091
5BUOB1-043
Rocker arms
Using the SST, depress the valve springs and remove the
rocker arms.
Note
Remove the rocker arms from the HLA side.
Valve keepers
Using the SST, depress the valve springs and remove the
valve keepers.
5BUOB1-090
I
I
MB1231-C 4BUOB1-071
Camshaft bearings
CAM BEARING REPLACER
T71 P-6250-A
Remove the camshaft bearings using Cam Bearing
Replacer T71 P-6250-A, or equivalent.
5BUOB1 -044
Valves
If the cylinder head is being repaired, remove the deposits
from the combustion chambers with a scraper and wire
brush before removing the valves.
4BUOB1-075