CAUTION
MGH 040-A
I
I
CAUTION WITH ELECTRICAL PARTS
Battery Cable
Before disconnecting connectors or replacing electrical
parts, disconnect the negative battery cable.
Connectors
Removal of connector
Never pull on the wiring harness when disconnecting
connectors.
Connectors can be removed by pressing or pulling the
lock lever as shown.
Locking of connector
When locking connectors, make sure to listen for a click
that will indicate they are securely locked.
Inspection
1. When
a
tester is used to check for covitinuity or to measure
voltage, insert the tester probe from the wire harness side.