Locknuts; Reverse Idler Gear; Secondary Shaft Rear Bearing - Mazda B-Series 1997 Workshop Manual

TRANSMISSION
J1
Locknuts
1.
Shift the transrnission into
1
st and 3rd gears.
2.
Remove the countershaft locknut.
MJ1089-A
3. Remove the secondary shaft locknut using the SSTs.
Caution
Do not reuse the removed locknuts.
REVERSE RETAINING RING
IDLER GEAR DIAMETER
RETAINING
IDLER SHAFT
~~~~~G
Reverse idler gear
1. Remove the reverse idler gear.
2. Remove the retaining ring, spacer, idler gear, needle
bearings and thrust washer.
Secondary shaft rear bearing
Remove the secondary shaft rear bearing using the SST.
Caution
Be sure the tools are properly positioned so that the
parts being removed are not damaged.