INSTAlLATION
B2
93X82-72!
93G0BZ757
-
J
93GO32-730
Alternator
and drive
belt
1. Monut
the alternator
to the engine.
Tightening
torque
@: 19-25
N-m (1.9-2.6
m-kg, 14-19
ft-lb)
@J: 37-52
N-m (3.8-5.3
m-kg,
27-38
ft-lb)
2. Install the drive belt. (Refer to page
82-Z)
Engine
mount,
clutch
release
cylinder
and
engine
mount
member
1. Install the No.3 engine
mount
rubber,
and loosely tighten
the bott and nuts.
2. Install the No.4 engine
mount
rubber
and bracket
assem-
bly, and loosely
tighten
the bolts and nuts.
3. lnstalt the clutch release cylinder
and pipe bracket assembly.
Tightening
torque
@: 16-23
Nm
[I .6-2.3
m-kg,
12-17
ft-lb)
0:
6.9-9.8
N-m (70-100
cm-kg,
61-87
in-lb)
4. Install the No.2 engine mount
rubber
and bracket assembly.
Tightening
torque:
37-52
Nrn (3.8-5.3
m-kg,
27-38
R-lb)
B2-25