Engine (3.0L) Disassembly - Mazda B-Series 1997 Workshop Manual

DISASSEMBLY
DISASSEMBLY
1. Code or arrange all identical parts (such as pistons, piston rings, connecting rods, and valve springs) so
that they can be reinstalled in the original cylinder from which they were removed.
2.
Clean the parts by using a steam cleaner. Blow dry with compressed air.
Note
During disassembly of any part of the system, be sure to study its order of assembly. Also, note
any deformation, wear, or damage, and repair or replace as necessary.
4811082-073
AUXILIARY PARTS
1.
Drain the engine oil.
2.
Remove the oil filter.
3. Disassemble in the order shown in the figure, referring to Disassembly Note.