Air Intake Hose - To Remove (4.0L); A/C Compressor Removal (4.0L); Power Steering Oil Pump Removal (4.0L); Fuel Hoses Removal (4.0L) - Mazda B-Series 1997 Workshop Manual

REMOVAL
Removal Note
Air intake hose
1.
Loosen the clamps.
2. Remove the breather hose.
3. Remove the air intake hose.
A/C compressor
1. Remove the AIC compressor bolts.
2. Remove the A/C compressor with the hoses still attached.
3. Position the A/C compressor away from the engine and
secure it with wire.
4BUOB3-069
Power steering oil pump
1.
Remove the power steering oil pump bolts.
2. Remove the power steering oil pump with the hoses still
attached.
3. Position the power steering oil pump away from the
engine and secure it with wire.
4BUOB3-070
Fuel hoses
Disconnect the fuel hoses.
Warning
Keep sparks and open flame away from the fuel
area.
Caution
Cover the hose with a rag because fuel will spray
out when disconnecting.
Plug the disconnected hoses to avoid fuel leakage.
4BUOB3-071
Accelerator cable shield
Remove the accelerator cable shield and bolts.