Mazda B-Series 1997 Workshop Manual page 745

SYSTEM INSPECTION
52
I
Terminal
E=
Edge transitional state
(Non-drivable)
If continuity is correct in all positions, go to transfer case
troubleshooting guide. (Refer to page
J2-33.)
If continuity readings are inaccurate, loosen switch
screws and adjust switch position sensor until correct
continuity readings are obtained in all corresponding
transfer case positions.
If continuity readings are not attainable, replace the shift
motor assembly. (Refer to page
J2-35.)
Note
View shift motor positions by holding shift motor as
shown.