Transmission Range (Tr) Sensor Replacement/Adjustment - Mazda B-Series 1997 Workshop Manual

K
ELECTRICAL SYSTEM COMPONENTS
TRANsMl s Si o N
RANGE
(TR) SENSOR
TRANSMISSION RANGE (TR) SENSOR
ReplacementlAdjustment
1. Remove the outer manual control lever end nut.
2. Disconnect the TR sensor from the wiring harness.
3. Remove the two TR bolts and the TR sensor.
4. Install the TR sensor on the manual lever. Finger-tighten
the bolts.
5. Position the selector lever to N.
6. Rotate the manual lever to the neutral position.
7. Install SST 49-UN01-086 or equivalent to align the three
slots in line on the TR sensor.
Note
The tool will have to be inserted into two slots, then
rotated to the third.
The manual lever must be in the neutral position.
8. Tighten the bolts
Tightening torque:
8-1 1 N.m (82-1 12 kgf cm, 71-97 in4bf)
-
5R55E
9. Install the outer manual control lever and nut.
Tightening torque:
30-35 N.m (3.1 -3.5 kgf.m, 22-26 ftlbf)
-
5R55E