Build Date Stamp Location - Mazda B-Series 1997 Workshop Manual

GI
SAFETY COMPLIANCE CERTIFICATION LABELS
MFD. BY FORD FOR MAZDA MOTOR CORP.
DATE: 4/94 GVWR: 4820 LBS 2186 KG
FRONT GAWR: 2465 LBS REAR GAWR: 2626 LBS
P215170R 14SL
14X5.5 JJ
AT 206.9 kPa 30 PSI COLD
AT 241.3 kPa 35 PSI COLD
, . q
THIS VEHICLE CONFORMS TO ALL APPLICABLE FEDERAL MOTOR VEHICLE SAFETY
/
STANDARDS IN EFFECT ON THE DATA OF MANUFACTURE SHOWN ABOVE.
I
-
VIN:
@'
TYPE TRUCK
4F4 C
R x
U
5
% 1
MOO001
(A) (6) (C) (D)
0
(F) (G) (H)
1 C 23
EXTERIOR PAINT COLORS
W E
1
NPE-GVW
/
BODY
1
TRANS
1
AXLE
1
TAPE SPRING
I
MG11032-C
1. Name of the Manufacturer
2. Date of manufacture
3. Front gross axle weight rating in kilograms
(kg) and pounds (Ib)
4. Front tire size
5. Rim size
6. Front tire cold kPa, (psi)
7. Gross vehicle weight rating in kilograms (kg)
and pounds (Ib)
8. Rear gross axle weight rating in kilograms
(kg) and pounds (Ib)
9. Rear tire size
10. Rim size
11. Rear tire cold kPa, (psi)
12. Vehicle identification number
I
5BUGIX-003
13. Type vehicle
14. Exterior paint codes
15. Wheelbase
16.
Model codes and GVWs
17. Seat types and interior fabric codes
18. Transmission codes
19. Rear axle codes
20. Tape accent codes
21. Suspension identification codes
(A) Front spring code
(B) Rear spring code
22. Front axle accessory reserve capacity in
kilograms (kg) and pounds (Ib)
23. Total accessory reserve capacity in kilograms
(kg) and pounds (Ib)
Build Date Stamp Location
The vehicle build date is a four-digit number representing
month and day of manufacture. It is stamped on the front
surface of the radiator support on the passenger side of
the vehicle.
For a build date of January 24, for example, the vehicle
date stamp reads 01 24; for a build date of October 21
,
the
vehicle date stamp reads 1021.
Yellow ink is normally used for the date stamp. When the
marking surface is painted the body color, the date stamp
will be marked in red ink.