4X4 Shift Control Switch Inspection; Check Shift Motor; System Inspection - Mazda B-Series 1997 Workshop Manual

SYSTEM INSPECTION
7 7
SYSTEM INSPECTION
4x4 SHIFT CONTROL SWITCH
Inspection
1. Remove the 4x4 shift control switch and disconnect the
connector from the switch. (Refer to page J2-34.)
2. Check the resistance between the terminals of the switch.
Resistance:
-
always approx. 18Q
MJ1165-A
@-@
2WD-approx. 3.9kR
4x4 HIGH-approx.
1
.l kQ
4x4 LOW-approx.
3600
3.
If not as specified, replace the
4x4
shift control switch.
MJ1166-A 5BUOJ2-047
Check shift motor
1. Disconnect the electronic shift motor assembly. (Refer to
page J2-35.)
2.
Check the resistance between the terminal (Y) wire and
termical (0) wire of the electronic shift motor assembly.
Resistance: Approximately 1 - 0 0
3.
If correct, go to magnetic clutch check.
4. If not as specified, replace the electronic shift motor
assembly. (Refer to page J2-35.)